28mm WWII bunker and fortifications AVAILABLE NOW!

Code: 28001CM
"Tobruk" Bunker for HMG (German)

This little bunker, called by the allies a 'Tobruk', was usually occupied by only one man who operated a MG42 machinegun, but there were 7 other basic types and lots of variants. Some types of 'Tobruk' were designed to fire mortars from, they are recognisable by the larger opening and a small pillar in the middle where the mortar was placed. Tobruk's were also modified to carry turrets of tanks, mostly pre-war turrets. For example, a Tobruk with a R35 tank turret, armed with a 3,7 cm gun, was positioned at Le Grand Vey (Wn 101) at the southern point of Utah Beach. One of the most common types of German bunker, the small but very effective "Tobruk" was often used to protect larger installations or behind multiple lines of minefields, barbed wire and tank traps. Typically 3 or 4 would be placed so as to create a 'killing zone' and maximize enemy casualties while crossing the obstacles. The bunker was meant to be completely buried, leaving only the little door at the side exposed; often that access was connected to a trench system.
You can simply place the top part of the bunker on the table, and it's ready to play; if you want to incorporate it into a more complex diorama or scenic table a separate side section is provided, This is what it could look like assembled; the door is also a separate piece so can be mounted in any position. Overall size is 110x70mm and the height is 25mm. The wall section is 55mm x 38mm and the door opening is 18mm x 30mm. Like all our models this is a historically accurate reproduction with plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy small arms fire, and it's made of tough POLYURETHANE.
Supplied unpainted.

To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges >
Plain cast: EURO€ 11.90
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.









Code: 28004CM
1 Medium Bunker for HMG (German)

A classic "PILLBOX" without annexes. These type were not built right on the beaches but further inland, and therefore lack any side wall designed to protect them from naval fire. They have been extensively used all over France and Germany, positioned near strategic locations such as bridges, main road crossing, railways, etc. Designed for a full squad with one or more MG34 / MG42, this bunker has a wide opening which allows an excellent field of view all around. This model has plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy small arms fire.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place; the door is also separate. Overall size is 104x75mm and the height is 56mm. Internal size is 72x45mm and the internal height is 35mm.
Supplied unpainted.

To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges >
Plain cast: EURO€ 16.00
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.









Code: 28005CM
1 Medium Bunker for HMG (German)

Another classic "PILLBOX" design, with plenty of beautifully sculpted surface detail to help you in painting, including damage from enemy fire.
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to be removed and allow access to the interior, or glued in place; the door is also separate. Overall size is 90x85mm and the height is 54mm. Internal size is 57x52mm and the internal height is 35mm.
Supplied unpainted.

To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges
Plain cast: EURO€ 16.00
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.












Code: 28013CM
Command Post (3 pieces)

A typical sandbags bunker with a separate roof piece and two "L" shaped sections of fortifications made with sandbags piled over fundations of discarded boxes and drums filled with soil. Toward the end of the war old tyres started to be piled on top of such fortifications for extra protection, a practice that proved very effective and it is still popular today. Designed to provide a complete stronghold in a box, all the models in this set have plenty of beautifully sculpted surface detail to help you in painting, and can be used for basically any conflict from WWII up to the most futuristic settings!
Like all other models in this range it is made of tough POLYURETHANE; the roof is a separate piece which can be left loose to make it easier placing figures inside or glued in place. The covered position size is 84x75mm and the height is 60mm with the roof on. The two sandbagged sections are 110x70mm and 90x70mm rispectively, both 26mm high. The figure is from our own range of 32mm figures: 1-48COMBAT
Supplied unpainted.

To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges
Plain cast: EURO€ 22.00
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.











Code: 28012CM
28mm AT gun sandbags emplacement

This model accurately reproduce the depth and structure of the real thing, and although it has been specifically designed for the BAM pak 40 and crew can of course be used for any gun of similar or smaller size and in virtually any theatre! As usual plenty of beautifully sculpted surface detail to help you in painting, plus this piece can be used for basically any conflict from WWII up to the most futuristic settings!
Like all other models in this range it is made of tough POLYURETHANE; The figure is from our own range of 32mm figures: 1-48COMBAT It is only there as a size reference and it is not included!
Supplied unpainted.
To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges
Plain cast: EURO€ 8.00
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.














Code: 28011CM
28mm HMG sandbags emplacement

The most basic type of sandbags emplacement, designed as a machine gun nest but can of course be used for any small size gun or direct fire ordnance and would be at home in virtually any theatre! As usual plenty of beautifully sculpted surface detail to help you in painting, plus this piece can be used for basically any 19th Century conflict up to the most futuristic settings!
Like all other models in this range it is made of tough POLYURETHANE; The figure is from our own range of 32mm figures: 1-48COMBAT
Supplied unpainted.
To order, the best way is to and tell us what you'd like and the delivery address. We'll check what we have in stock, calculate the total including exact postage for you, give you an approximate delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
Of course if you prefer you can also order directly using our convenient shopping cart:
Click here for shipping charges
Plain cast: EURO€ 6.00
Quantity:
Development status:
Design: completed
Master: completed
Mold: completed
Production: Item is available now
Future plans: none.