Code: 15SWH

15mm stone warehouse, in the same style as the round stone hut above, buildings of this kind were used by nearly every population living in rocky areas, and are still commonly found today (sometimes still in use) in most European countryside. Some of the first structures to be built in stone, warehouses such this were generally made for the use of an entire small community and would be used to store the most valuable possessions.
This model is an accurate, very realistic and highly detailed reproduction. The architectonic style is timeless, making use of a monolithic lintel and therefore particularly indicated for ancient Macedonia, Thrace, Sicily and generally any hill country and also suitable for a main Celtic or Pict settlement. There are still examples of this kind of construction commonly scattered across Spain and Italy, Greece, Illiria, Anatolia and all Eastern Mediterranean. The model is about 42 mm by 46mm wide at the bottom and 48 mm tall. In 1/100 (the scale roughly equivalent to 15mm) the entrance is 1.8 m wide and two meters high, to allow for large bulky items to pass through.
Require basic assembly. Supplied unpainted.

---

Plain cast: EURO€ 7.50

15SWH
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15WFN

15mm wattle fence. Included here are three different fence sections: a straight 80mm long piece, a 40mm long one and a 40mm section with a gate on. Pack contains five of the 80mm long sections and one each of the others. There is no need for curved sections as these can be easily bent simply by warming them up (a powerful hair-drier should do the trick nicely) and then set them again by plunging them in cold water. Unlike other similar products you may have seen from other manufacturers these are not only beautifully sculpted with sharp raised detail to help in painting, but are made of very though high quality polyurethane and will last you for a lifetime of gaming!
Can be used from prehistory up to contemporary settings in any rural area; It can be added to any ancient town or village and also used as animal pens. The model are approximately 10mm wide at the base and the pack makes for 48cm (19 inches) of continuous fence. Supplied unpainted.

---

Plain cast: EURO€ 8.50

15WFN
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15TRY

Small town house. The less wealthy abitants of ancient dwellings lived in simple single floor housing like these, but the model could also be used for a small warehouse or workshop, or even as an extension for a larger building.
This model is in Mycenaean style, which makes it particularly suitable not only for the city of Troy, but for all ancient Greek City States and colonies, including those in Southern Italy, Black Sea and North Africa, and for cities in Macedonia, Crete, Cyprus, Egypt, Assyria, Phoenician colonies including Carthage, and all cities and states in present-day Lebanon, Israel and Jordan! It's based on accurate archaeological evidence and it is a very realistic and highly detailed reproduction. It can be added to any ancient town or village around the Mediterranean and in the Near East from the beginning of history well into the Classical age. The model is 60x35 mm at the base and 33mm tall. The roof is a separate part.
2 parts. Require basic assembly. Supplied unpainted.

---

Plain cast: EURO€ 7.50

15TRY
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Want this model pre-painted, based and Ready-to-Play? Click here!

Code: 15TRZ

Large two floors city house. The more well-to-do citizens of the city lived in larger two-storey house, standing close together and forming the continuous sides of strees. "Constructed of sun-dried mud-brick reinforced with timber and plastered with mud, these stand on low, rubble-stone foundations. The inhabitants of a house generally dwell in the upper storey, the lower one being divided into two or more rooms serving as workshop and storage. The flat roof, which is of timber and reed coated with thick mud plaster, is commonly used to sun-dry grapes and figs, as well as serving as an ideal place to relax and watch the world drift by."
^{(From Osprey Fortress 017 - Troy 1700-1250 - Nic Fields - Used without permission.)}
This model is in Mycenaean style, which makes it particularly suitable not only for the city of Troy, but for all ancient Greek City States and colonies, including those in Southern Italy, Black Sea and North Africa, and for cities in Macedonia, Crete, Cyprus, Egypt, Assyria, Phoenician colonies including Carthage, and all cities and states in present-day Lebanon, Israel and Jordan! It is based on accurate archaeological evidence and it is a very realistic and highly detailed reproduction. It can be added to any ancient town or village around the Mediterranean and in the Near East from the beginning of history well into the Classical age. The model is 82x55 mm at the base and 75mm tall.
3 parts. Require basic assembly. Supplied unpainted.

---

Plain cast: EURO€ 14.80

This item is not always in stock and it may take up to two weeks to be ready to ship. before ordering to check for availability if waiting is an issue...

15TRZ
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15STB

Enclosed stable. Good horses were reserved to the very richest of citizen and the military, and were the subject of great care as well as the source of great pride. This close stable with two wide doors could shelter a whole chariot as well as a horse team and all tack, and would make a perfect objective for a raid in a small scenario game, or just be a great looking addition to your ancient town!
This model is in Mycenaean style, which makes it particularly suitable not only for the city of Troy, but for all ancient Greek City States and colonies, including those in Southern Italy, Black Sea and North Africa, and for cities in Macedonia, Crete, Cyprus, Egypt, Assyria, Phoenician colonies including Carthage, and all cities and states in present-day Lebanon, Israel and Jordan! It is based on accurate archaeological evidence and it is a very realistic and highly detailed reproduction. It can be added to any ancient town or village around the Mediterranean and in the Near East from the beginning of history well into the Classical age. The model is 74x64 mm at the base and 33mm tall and is designed to fit around the larger buildings in this range like the two floor house.
2 parts. Require basic assembly. Supplied unpainted.

---

Plain cast: EURO€ 12.50

15STB
Quantity:

This item is not always in stock and it may take up to two weeks to be ready to ship. before ordering to check for availability if waiting is an issue...

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15SHD

Small extension to be attached to a larger building, or to a tower or wall section. Excellent way to lock up and store stuff you want to keep handy, outbuildings like this were very common throughout all ages.
This model is in Mycenaean style, which makes it particularly suitable not only for the city of Troy, but for all ancient Greek City States and colonies, including those in Southern Italy, Black Sea and North Africa, and for cities in Macedonia, Crete, Cyprus, Egypt, Assyria, Phoenician colonies including Carthage, and all cities and states in present-day Lebanon, Israel and Jordan! It is based on accurate archaeological evidence and it is a very realistic and highly detailed reproduction. It can be added to any ancient town or village around the Mediterranean and in the Near East from the beginning of history well into the Classical age. The model is 29x27 mm at the base and 38mm tall.
Supplied unpainted.

---

Plain cast: EURO€ 3.50

15SHD
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15BRD

A modular bridge set for your gaming tables that can be used for basically any conflict from biblical time up to the most futuristic settings! Being made of modular components means you can tailor the length to your needs, and combine it with other elements of our ranges. Not only that, but while this model is specifically designed as a military wooden bridge for 15mm games, and it is therefore the exact width to comfortably hold a 40mm wide figures base, it also works perfectly well with larger scales as a smaller construction.The complete model is 230x68 mm at the base and 32mm tall. The walkway is 45mm wide and at the top of the ramp is 20mm high. It can be very easily cut to a shorter size if needed, or you can purchase additional modules to extend it!
5 parts. Supplied unpainted.

---

Plain cast: EURO€ 19.50

15BRD
Quantity:

---

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15BRX

An expansion for our modular bridge set, the free-standing supports and wooden walkway match those of the bridge pack so they can be combined to extend it as much as one likes! You can use the bridge extension pack also on its own to make a small wooden jetty, perfect for 28mm figures, or a much larger harbour dock for 15mm! The complete model is 85x68 mm at the base and 32mm tall. The walkway is 45mm wide and stand 20mm high from the ground.
3 parts. Supplied unpainted.

---

Plain cast: EURO€ 7.50

15BRX
Quantity:

• How to order
• Back to Urbis main page
• Back to Home page

Code: 15BRA

A modular barge bridge set that can be used from medieval time up to WWII! Being made of modular components means you can tailor the length to your needs, and combine it with other elements of our ranges. This model is specifically designed as a military wooden bridge for 15mm games, and it is therefore the exact width to comfortably hold a 40mm wide figures base, it also works perfectly well with smaller scales as a larger construction. The complete base model include three barges and the overall size is180x80mm, 32mm tall. The walkway is 45mm wide and at the top of the ramp is 15mm high. It can be used with less barge modules to have a shorter size if needed, or you can purchase additional modules to extend it!
5 parts. Supplied unpainted.

---

15BRA complete modular barge bridge: EURO€ 19.50

15BRA
Quantity:

---

15BRB single barge module: EURO€ 7.50

15BRD
Quantity:

---

• How to order
• Back to Urbis main page
• Back to Home page