|
>
HOP4-b: Corner conversion pack for HOP4
This is a conversion pack, composed of two "L" shaped corner elements, especially designed to allow elements to defend right on top of the embankment and still be legal under DBM rules.
To explain this better look at this image:
this is where an element is required to be to defend the TF by the "no internal frontage" requirement in the DBM rules using the round corner 15FOR-C which comes with the standard pack.
Now look at this image:
this is where that same element can be to defend the TF when using the 15FOR-T corners included in this conversion pack.
The pack include all the modules required to make two corners: 2 x 15FOR-T, 4 x 15FOR-H and 1 x 15FOR-V.
PLEASE NOTE that each of these corner element counts as two TF elements plus one (AP free) corner in DBM terms.
|
|
sorry, this item has been discontnued and it is OUT OF STOCK at the moment! If you like you can still order it as a special custom purchase but it will take at least one week before we can add these to the rest of your order.
To order it as a special custom purchase just click here and
|
|
|
|
|
|
|
|
|
>
HOP4-c: Gate expansion pack for HOP4
You can form a gate simply by leaving a gap in the fortification line, and eventually use the module 15FOR-G to cover the ends. For those who prefer to have a more impressive fortified barred gate, the answer is this gate pack. It is actually a complete subsystem which consist of two truncated embankment elements, (left and right, each with his timber stockade) which leave a full module frontage (40mm) gap in the middle, and a wooden barred gate of the same frontage to close the gap itself. This forms the base for a separate wooden superstructure to defend the gate, which include a pontoon, a frontal parapet and two side supports with access ladders nailed on.
The entire gate subsystem is 3 elements wide (120mm), it is composed of 10 parts, requires assembly and is sold as a single (unpainted) item. The pack include all the modules required to make the gate: 1 x 15FOR-I.
PLEASE NOTE that this entire set counts as two TF elements plus one gate element in DBM terms.
|
|
|
|
|
|
|
BACK IN STOCK!
|
|
|
|
>
HOP4-d: Artillery emplacement expansion pack for HOP4
This emplacement include a single extra deep embankment element with his stockade and allow you to place an artillery base or any other particularly deep base like hordes right to the top of the rampart. As such if you play DBM is most useful when used in conjunction with HOP4-b corners. It can be used with round corners and next to another similar extra-deep emplacement, but for the best visual appeal we suggest to use at least one standard embankment between these.
The pack include both the modules required to make the emplacement: 1 x 15FOR-L and 1 x 15FOR-H. keep in mind that the deeper embankment while perfectly legal under DBM will reduce the space available for baggage inside a camp!
PLEASE NOTE that this set counts as one TF element in DBM terms.
|
|
|
|
|
|
|
sorry, this item has been discontnued and it is OUT OF STOCK at the moment! If you like you can still order it as a special custom purchase but it will take at least one week before we can add these to the rest of your order.
To order it as a special custom purchase just click here and
|
|
|
|
|
|
|
|